61
5.11.14 Pairing Sounder Base
When an addressable sounder base is added to the job in the Configurator, it is assigned an
address based on the address of the AP sensor it is connected to. However, the physical
sounder base has a default address which might not match the configured address. This
mismatch generates a “mismatched address” or “unconfigured device” error on the panel. This
error usually occurs on new installations, or in situations where the sounder bases have been
replaced.
This option synchronizes the internal address of the sounder base with the address of the AP
sensor it is connected to. This command applies only to the node that it is activated from.
The user is prompted for confirmation as shown below:
The system synchronizes the internal address of the sounder bases on the node that the
command was activated from.
5.11.15 Exit
Exits to the main command menu.
Confirm sounder addr
pairing?
Summary of Contents for FX-3500RCU
Page 2: ......
