52
The report shows the loop number and device address in the following format:
Press the
UP
and
DOWN
cursor keys to scroll through all the devices on the loop for which the
report is available.
The first line identifies the AP device, and the second line identifies the output group numbers
for every device. A device can be in four output groups. The value
0
does not indicate any
particular output group.
12.
AP Param List
The AP Param List report displays all local parameters of an AP device currently connected on
the SLC. This feature lists the internal register values of current AP devices.
Generate this
report when requested by technical support.
If the panel is connected to a printer, select an output source:
Select “Y” or “N' at the “Single address” prompt. If you select “N”, the report will show
parameters of all AP devices.
If you selected “Y”, select “N” or “Y' at the “Sounder base” prompt. If you select “Y”, the report
will show parameters of the attached sounder base.
If you selected “Y” at the “Single address” prompt, enter the address of the device.
The display lists all the parameters of all the subaddresses related to the device.
Loop Number
Loop :__
Loop 1 Addr. 107
0, 0, 0, 0
- Report To -
1. Printer
2. Screen
Single address:?Y
Sounder base:?N
Device Address
Loop: _ Addr: _
Summary of Contents for FX-3500RCU
Page 2: ......
