Mircom FX-3500RCU, Installation And Operation Manual

Page: 25 / 103

25
To Install the IPS-2424DS Programmable Input Switches Module
1. Remove the blank cover plate from the front door and install the IPS-2424DS in the
opening with the hardware provided.
2. Disconnect main and standby power and connect the IPS-2424DS as shown in Figure 9.
Figure 9 IPS-2424DS Cable Connections
4.9 Installing the IPS-4848DS Programmable Input Switches
Module
The IPS-4848DS Programmable Input Switches Module mounts into a series of enclosures as
part of the fire alarm system. This adder module provides 48 programmable switches, 48 bi-
coloured (red/amber) LEDs for fire alarm zone annunciation and 48 amber trouble LEDs.
Figure 10 IPS-4848DS Programmable Input Switches Module Front Chassis View
Ribbon Cable connects here on IPS-2424DS and
goes to the next display module Ribbon IN.
Ribbon Cable is permanently attached
here and connects to previous Ribbon
OUT connector.
Zone Bypass
#1
Zone Bypass
#9
Zone Bypass
#17
Zone Bypass
#25
Zone Bypass
#33
Zone Bypass
#41
Zone Bypass
#2
Zone Bypass
#10
Zone Bypass
#18
Zone Bypass
#26
Zone Bypass
#34
Zone Bypass
#42
Zone Bypass
#4
Zone Bypass
#12
Zone Bypass
#20
Zone Bypass
#28
Zone Bypass
#36
Zone Bypass
#44
Zone Bypass
#5
Zone Bypass
#13
Zone Bypass
#21
Zone Bypass
#29
Zone Bypass
#37
Zone Bypass
#45
Zone Bypass
#6
Zone Bypass
#14
Zone Bypass
#22
Zone Bypass
#30
Zone Bypass
#38
Zone Bypass
#46
Zone Bypass
#7
Zone Bypass
#15
Zone Bypass
#23
Zone Bypass
#31
Zone Bypass
#39
Zone Bypass
#47
Zone Bypass
#8
Zone Bypass
#16
Zone Bypass
#24
Zone Bypass
#32
Zone Bypass
#40
Zone Bypass
#48
Zone Bypass
#3
Zone Bypass
#11
Zone Bypass
#19
Zone Bypass
#27
Zone Bypass
#35
Zone Bypass
#43