GUIDE TO INSTALLATION AND OPERATION
XVP-3901 |
73
Multiband Limiters
Performs multiband limiting of the signals coming from the
multiband compressor.
•
B1 - B5 Lim(it) Thresh(old): +12.00dB - 0.00dB
(default: B1:+4.25dB, B2:+4.25dB, B3:+6.50dB,
B4:+9.00dB, B5:+9.00dB). The point above which
limiting action takes place at an Infinity:1 ratio.
•
B1 Soft Clip Thresh(old): +12.00dB - 0.00dB (default:
+3.00dB)
•
B2 Soft Clip Thresh(old): +12.00dB - 0.00dB (default:
+6.00dB). The point above which band one (low bass)
is very quickly limited, acting more like a clipper
without the artifacts. This helps maintain a “tight” bass
sound.
Multiband EQ
This is the section where each of the processing bands is
summed and where overall frequency response can be
tailored.
•
B1 - B5 Out(put) Mix: -12dB - + 12dB (defaults: 0dB,
all bands). Sets the mix level for each band
summing all bands back together. These controls
are prior to the final look ahead limiter and
increasing gain may cause more final limiting
(possibly more than desired).
Figure 5.64
ALC Module – MB Limiters Parameters
Figure 5.65
ALC Module – MB EQ Parameters
