GUIDE TO INSTALLATION AND OPERATION
XVP-3901 |
85
5.11 Dolby Metadata panel
This panel provides resources for managing the flow of
Dolby metadata through the XVP-3901. The Dolby metadata
panel is part of the audio processing option (XVP-3901-OPT-
AUD).
•
Note that unlike the audio processing configuration,
only one (1) Dolby metadata configuration is saved by
the card, regardless of the input format (3G/HD or SD).
Multiple layers of tabs allow the user to drill down to the
various available controls. For notational purposes, the path
to a particular control panel will be described here as:
[layer 1 tab]
→
[layer 2 tab]
→
[layer 3 tab]
For example, the panel shown in the figure on the right would
be described as:
[Path #1]
→
[Probe 1]
→
[Dynamic Range]
5.11.1 Path 1 & Path 2 tabs
These two tabs are identical in layout, and will be described together.
•
Note that the Generator and Probe are path-specific; i.e. Path #1 has Generator 1 and Probe 1, while Path #2
has Generator 2 and Probe 2.
Input Presence:
Status icons are provided to indicate
sources where Dolby Metadata is present and valid. The
following are shown:
•
VANC Stream 1
•
VANC Stream 2
•
RS-422B
•
Decoder 1 (grey if not installed)
•
Decoder 2 (grey if not installed)
Source:
This area allows source selection for Path #1.
•
The currently-active pathway is shown in green.
Primary:
Use this pulldown to select the primary metadata
source for this path.
The pulldown shows the same sources as appear in the Input Presence section. The Decoder 1 & 2 sources will
appear in red if the modules are not installed.
Figure 5.68
Dolby Metadata panel
Figure 5.69
Dolby Metadata - Path 1 tab
