Miranda XVP-3901 DENSITE series Manual To Installation And Operation Download Page 120

Page: 120 / 143

GUIDE TO INSTALLATION AND OPERATION

114

| XVP-3901

Copy to other cards

Click this button to open a panel that allows the alarm
configuration set for this card to be copied into another XVP-
3901 card.

•

Select one or more destination cards from the list in the
window by clicking in the checkboxes, or all of them by
clicking in the

All

checkbox

•

Note that when you do a Copy Profile for this card (see
Sect.5.16), the alarm configuration is copied along with
all the other settings.

Get alarm keys

Click this button to open a save dialog where you can save a
file containing a list of all alarms on this card and their current
values, along with an Alarm Key for each. The alarm keys are
useful for system integration and troubleshooting.

•

The file is saved in Excel.csv format

OK, Apply, Cancel

•

accepts the settings and closes the window once the card confirms that there are no errors.

•

Apply

accepts the settings, but leaves the window open

•

Cancel

closes the window without applying any changes, and leaves the previous settings intact.

Figure 5.106

Copy to other cards window

Figure 5.107

Get alarm keys dialog

Summary of Contents for XVP-3901 DENSITE series
















































































































































Search results

Summary of Contents for XVP-3901 DENSITE series

Reviews:

Related manuals for XVP-3901 DENSITE series

Brands by name

Popular brands

Miranda XVP-3901 DENSITE series, Manual To Installation And Operation

Search results

Summary of Contents for XVP-3901 DENSITE series

Reviews:

Related manuals for XVP-3901 DENSITE series

Brands by name

Popular brands