MIRACALL TECHNOLOGY CO.,LTD
７２
On hook-on status,
press “CHECK” key three times and input system password “1234567”. Then input
purpose System Program02 and input purpose Trunk line port X ( X stands for Trunk line from 1 to 8.) after
hear “du” identification tone. Then press “TRFR” key once and cursor shifts to program status
column and
input “00011”, finishing inputting means finishing program. If want to change other Trunk line port , Then
press “TRFR” key once and cursor shifts to Trunk line port No. Column and input Trunk line port No. XX ,
and
repeat the above procedure. After confirm, press “ HOLD” key once and exit from System Program02
automatically. If still want program other system item, input purpose item No. . Otherwise, press “CLEAR”
key once and exit from system or hook on or off to exit.
For example: Set Trunk line port No. 01 with reverse polarity account.
On hook-on status,
press “CHECK” key three times - input system password “1234567”- 02-1 - press
“TRFR” key-00011-press “ HOLD” key -press “CLEAR” key once and exit .
Operation at single line phone
Hook off , input “ ##787” and system password “1234567”. Then input purpose System Program02 and input
purpose Trunk line port No X ( X stands for Trunk line port no. from “1” to “8”.* stands for all Trunk line port. )
after hear “du” identification tone. Then press “*” key once and cursor shifts to program status
column and input
“00011”, finishing inputting means finishing program. If want to change other Trunk line port , Then press “*”
key and cursor shifts to Trunk line port No. Column and input Trunk line port No. XX ,
and repeat the above
procedure. After confirm, press “ #” key once and exit from System Program02 automatically. If still program
other system item, input purpose item No. . Otherwise, hook on to exit.
For example: Set Trunk line port No. 01 with reverse polarity account.
Hook off , input “ ##787 - input system password “1234567”- 02-1 - press “*” key-00011-press “ #” key –hook
on and exit.
* 2-5-31 Caller ID
Function Introduction
It is a selectable function. There are two king of display mode – FSK and DTMF. No matter how many times
an incoming call and internal call is transferred, it’s Caller ID number can be displayed again and again on
key phone and single line phone.
Default Setting
NIL
Note:
* The function is selectable. If users want to use the function, need to buy Caller ID board, install correctly
and set as the following.
* The function is set at System Program01 and the meaning as the following:
1-10030 : “ 1” is outside line port column, you choose from “1” to “8” , which stands for trunk line port No.
from 1 to 8.
“10030” is function column:
