MIRACALL TECHNOLOGY CO.,LTD
１９
◇◇
Program 06
◇◇
SYSTEM SETTING #3
K: 0-3 (Automatic redial time selection:0 - dialing 30 sec and retry after 3 min, I -dialing 30 sec and retry after for 1 min, 2
- dialing 30 sec and retry after 30 sec, 3 -dialing 15 sec and retry after 15 sec)
L: 0~1 (IP Router, to add “#” automatic at end of the phone number ,0-to add, 1- no need to add)
M: 0-4 (Auto-call back on busy timer: 0 - disable, I - 30 sec, 2 - 1 min, 3 - 1.5 min, 4 - 2 min)
N: 0-1 (Alert for Call Duration Restriction, 0 – alert for both incoming and outgoing call, I – alert only for outgoing call)
O: 0-1 (DSS console connected to Key Telephone: 0 - no, 1 –yes. Remarks: connect at station port 001 only)
Programming for Single Line Telephone:
Enter the values of KLMNO and then press # to return to the main menu.
Remarks: Condition of Call Time Control related with program 22; IP Router: for complete IP number ,some region
need to add “#” at end, some region no need.
◇◇
Program 07
◇◇
System setting #4
P: 0-1 (flexible extension numbering: 0 – allow leading digit 2,3, 8 only(non-full flexible numbering mode).
1 - allow leading digit from 1~8(full flexible numbering mode).)
Q: 0 (nil)
R: 0 (Print out port : Serial port only)
S: 1 (nil)
T: 0-1 (SMDR data print out selection: 0 – Only calculate Long-distance calls,1 – Calculate long-distance and Local calls)
Programming for Single Line Telephone:
Enter the values of PQRST and then press # to return to the main menu,
SYSTEM SETTING 3
-20200 ( - KLMNO )
SYSTEM SETTING 4
-00100 ( - PQRST )
