MIRACALL TECHNOLOGY CO.,LTD
４０
Default Setting
NIL
Notice
* Implementing the function is consisted of the following relative items. And can set 10 groups IP , and at
the same time, can be used 10 users. Before setting, must use IP card at real occasion and record the
following information, then begin to set.
* At 00 group of item no. 03, set the first group IP card routing no. ( For example: 200 card, 17909card),
set the first group IP card voice selection instruction at 01 group, set the first group IP card number at 02
group, set the first group IP card password at 03 group, set waiting time of the first group IP card at
04group. (The time consist of 8 digits, and the unit is second. The first and second digit represents waiting
time for playing voice after inputting IP card number. The third and forth digit represents waiting time for
playing voice after inputting IP card voice selection instruction. The fifth and sixth digit represents waiting
time for playing voice after inputting IP card number. The seventh and eighth digit represents waiting time
for playing voice after inputting IP card password), and so on. Per five group digits represents one IP card
number and can input 10 group digit at most. If input IP card without car number and password, it is ok to
only input IP car routing number and users can dial any place’s long distance call.
* Setting “0” at the second item of program item No. 06 means that “# ” will be automatically added after
finishing dialing telephone number.
* Setting “0” at the second item of program item No. 07 means that system shut off IP routing, but “1”
means opening IP routing. And default is “0”.
* Setting “0” at the third digit of program item No. 23 means that input relative instruction at one extension
to make system shut off IP routing, but “1” means that it is non-effective when that input relative
instruction at one extension to make system shut off IP routing. That is to say to dial long distance call with
IP card compulsively.
* Setting “0” at the last column of item No.30 international region code means that system does not open
IP routing at the area, “1” means open IP routing. Operation is to make cursor shift to the first digit of unit
price. Press “# ” key to switch to “1” or “0”. If input “*” after IP routing number means can dialing any area
with the IP.
* Setting “0” at the last column of item No.31domestic region code means that system does not open IP
routing at the area, “1” means open IP routing. Operation is to make cursor shift to the first digit of unit
price. Press “# ” key to switch to “1” or “0”. If input “*” after IP routing number means can dialing any area
with the IP.
*Instruction to open IP routing -- 730# ; Instruction to shut off IP routing --731# , if use IP routing, it is
non-effective to use the instruction to shut off IP routing.
Program Procedure
Operation at key phone.
On hook-on status, press “CHECK” key three times and input system password “1234567”, then input
program item No. 03 after hearing identification tone “du”, then input group No. 00 of the first IP card.
Then input “TRFR” key once and cursor shifts to routing number status column and input routing number.
Then input “TRFR” key twice and cursor shifts to voice selection status column, then input voice selection
code. Then input “TRFR” key twice and cursors shift to IP card number status column, then input IP card
number. Then input “TRFR” key
twice and cursor shifts to IP card password status column, then input IP
