Page 21
EZ Mop 360° User Manual
DIRECT WASHING OR FOR SLIGHTLY DIRTY SURFACES
Scrubbing and drying in a single pass.
Prepare the machine and use it as described in section OPERATING THE MACHINE.
POST-CLEANING OPERATIONS
1. Turn off the detergent dispensing function.
2. After having completely dried the surface of any traces of water, wait a few seconds, then raise the
squeegee and turn off the vacuum motor.
3. Go to a suitable place where to drain the tanks.
4. Empty and clean the tanks (see sections FILLING AND EMPTING THE SOLUTION TANK and
DRAINING THE RECOVERY TANK).
5. Turn off the machine using the ON / OFF switch
6. Lock the handle using the locking lever.
7. Charge the battery, if necessary.
NOTE:
Never use the machine without a detergent solution as it may damage the fl oor.
INDIRECT WASHING OR FOR VERY DIRTY SURFACES
Scrubbing and drying in multiple passes.
Prepare the machine and use it as described in section OPERATING THE MACHINE.
First step:
Wash the fl oor as described in section OPERATING THE MACHINE.
without drying it.
Give the detergent solution time to act on the dirt, as indicated in the instructions of the detergent used.
Second step:
Proceed as explained in the previous section and also dry the fl oor.
NOTE:
Never use the machine without a detergent solution as it may damage the fl oor.
Summary of Contents for EZ Mop 360 degrees
Page 1: ...EZ Mop 360 User Manual ...
