Page 23
EZ Mop 360° User Manual
Remove the squeegee from the machine and clean it under running water using a sponge or brush.
Check the effectiveness and the wear of the rubber blades that are in contact with the fl oor.
They are designed to scrape the detergent-water fi lm on the fl oor and to isolate that area of the surface
to help the vacuum motor reach the maximum vacuum pressure: this ensures that the machine will dry
the fl oor completely.
Working like this continuously causes the sharp edge of the blade to become round or to wear, thereby
reducing its drying effi ciency. The squeegee blades must therefore be replaced fairly often.
If necessary, turn the blades in order to use the other sharp edges or to install new ones (see section
REPLACING THE SQUEEGEE BLADES).
6.4 SQUEEGEE
CAUTION
Do not handle the squeegee with bare hands: wear gloves and any other protective
clothing that may be necessary.
6.5 VACUUM FILTER
1. Release the fastening clips 1
2. Remove the tank 2
3. Remove the fi lter 3 from its seat and clean it under running water.
4. After cleaning, replace the fi lter 3 in its seat
5. Put the tank 2 back into the handle.
Summary of Contents for EZ Mop 360 degrees
Page 1: ...EZ Mop 360 User Manual ...
