Page 20
EZ Mop 360° User Manual
1. Switch on the machine pressing powerbotton
1.
2. Lower the squeegee.
3. Lift the lever
6
to release the handle
7
.
4. Start the brushes and the dispensing of the solution (water + detergent) using switch
3
and
4
5. Turn on the vacuum using the switch
2
.
6. Wash the fl oor by moving slowly forwards and follow the machine as it progresses due to the
movement of the brushes.
5.10 OPERATING THE MACHINE
ϯ
Ϯ
ϭ
ϱ
ϰ
CAUTION
Remember to raise the squeegee before reversing in order to avoid damaging it.
NOTE:
The machine is fi tted with a motor overload protection system that stops the motor in the
event that the ON/OFF switch is pressed repeatedly at short intervals.
The machine must be restarted in order to resume normal operation.
5.11 FLOOR CLEANING INSTRUCTIONS
PREPARATION AND WARNINGS
Remove any loose solid residues from the surface to be treated (using suitable equipment such as vacuum
cleaners, sweepers, etc.) If this is not done, the solid dirt could prevent the squeegee from working properly
and prevent the fl oor from being dried correctly.
This machine must only be used by trained personnel.
CAUTION
Do not obstruct the motor cooling fan grille.
Summary of Contents for EZ Mop 360 degrees
Page 1: ...EZ Mop 360 User Manual ...
