Page 11
EZ Mop 360° User Manual
After unpacking the machine, it must be assembled as described below (refer to the relevant sections in
Chapter 5 for a detailed description of these procedures):
1. Fit the brushes
2. Fit the squeegee and make sure that it is securely fastened and connected to the suction hose.
3. Fill the solution tank.
4. Place the battery into the compartment and connect the connector.
3.5 ASSEMBLING THE MACHINE
DANGER!
All the operations described below must be carried out in areas having adequate lighting and
only when the battery has been removed from the machine.
4. TECHNICAL INFORMATION
4.1 GENERAL DESCRIPTION OF COMPONENTS
1. ON/OFF switch
2. Power indicator light
3. Brush / Brush+Water switch
4. Vacuum motor switch
5. Handle
6. Recovery tank fastening clip
7. Suction hose
8. Battery
9. Squeegee
10. Brushes
11. Solution tank
12. Wheels
13. Drain plug
14. Vacuum motor fan
15. Filler plug
16. Handle lock/release lever
17. Recovery tank
18. Vacuum fi lter
19. Graduated container
20. Battery chargerA
4.2 INSPECTION UPON DELIVERY
To store the machine, lower the handle locking/unlocking lever, make sure that the machine rest on the three
wheels (not on the brushes) and that thelever “A” is in a horizontal position as when moving the machine.
CAUTION
Do not store the machine with the brushes resting on the fl oor, the weight may deform the
bristles, reducing their performance.
Summary of Contents for EZ Mop 360 degrees
Page 1: ...EZ Mop 360 User Manual ...
