Page 15
EZ Mop 360° User Manual
Assembly Procedure:
1. Lock the handle using the locking lever.
2. Grip the handle and, using it as a lever to lift the
front of the machine, rotate it (A) backwards.
3. Insert (B) the brushes onto the appropriate pins
and press (C) all the way down.
To remove them, follow the procedure indicated in
point 3 in reverse.
5.3 FITTING AND REMOVING THE BRUSH
CAUTION
Only use the machine if the brushes or pad drivers, together with abrasive disk, are installed
properly..
NOTE:
Follow the same procedure to fi t / remove the pad driver.
CAUTION
Replace the brushes / abrasive discs before the length of the bristles or the thickness of the
abrasive discs become less than 1 cm.Working with brushes that are excessively worn, or
abrasive discs that are excessively thin, may damage the machine and the fl oor. Regularly
check the wear on these parts before starting to use the machine.
Summary of Contents for EZ Mop 360 degrees
Page 1: ...EZ Mop 360 User Manual ...
