Page 22
EZ Mop 360° User Manual
Drain the two tanks as described in the relative sections FILLING AND EMPTING THE SOLUTION TANK
and DRAINING THE RECOVERY TANK.
Remove any solid dirt by fi lling and draining the tanks until all dirt has been eliminated.
Do this using a hose or similar item and only wash the inside of the tank.
6. MAINTENANCE
DANGER!
All maintenance work or the replacement of accessories must be carried out in areas with
adequate lighting and only after having disconnected the machine from the power supply by
unplugging the battery connector.
NOTE:
All work on the electrical system and all maintenance and repair work (especially work not spe-
cifi cally described in this manual) should only be carried out at authorised service centres or by
skilled personnel with experience in the fi eld and knowledge of the relevant safety regulations.
Carrying out regular maintenance on the machine, carefully following the manufacturer’s in-
structions ensures better performance and a longer machine service life.
6.1 TANKS
CAUTION
Water temperatures in excess of 50°, high-pressure washers or excessively powerful
sprays can damage the tanks and the machine.
Leave the plugs of the tanks open (only while the machine is not being used) so that the
tanks can dry and prevent the formation of unpleasant odors.
6.2 DETERGENT SOLUTION TANK FILTER
6.3 SUCTION HOSE
1. To clean the detergent solution fi lter, remove the plug 1 and
the fi lter element 2.
2. After cleaning, place the fi lter element 2 back into its seat and
screw the plug back on 1.
1. Disconnect the suction hose 1 from the squeegee 2.
2. The hose 1 can now be cleaned and any obstructions
removed.
3. After cleaning, insert the hose 1 fi rmly onto the squeegee
body 2.
Summary of Contents for EZ Mop 360 degrees
Page 1: ...EZ Mop 360 User Manual ...
