Minolta Color PageWorks Pro L User Manual Download Page 81

Page: 81 / 222

Driver Settings: Windows 95/Windows 98

3-10

• Auto*

• Tray1 (Envelope)

• Tray1

• Tray2 (Transparent)

• Tray2

• Tray3 (Transparent)

• Tray3 (option)

• Manual (Transparent)

• Manual*

• Manual (Thick paper)

• Tray1 (Transparent)

• Manual (Envelope)

• Tray1 (Thick paper)

*1: Auto

• The printer automatically selects the size of paper that is speci-

fied in the Paper Size setting from either Tray2 or Tray3.

• When Auto is selected and either Tray2 or Tray3 runs out of

paper, the printer will automatically go to the next tray if it con-
tains the same size and type of paper.

Note

*2: Manual

The manual feed mode allows you to review each output document by
feeding individual sheets, one at a time, into the printer.
When manual is selected, the

“wait action”

message will be

displayed. Printing will take place when a piece of paper is set onto
Tray1 and the Action key is pressed.

Default

Click the

Default

button to reset the functions of the tab to their

original values.

• Tray1 does not support the Auto mode, nor is it selected during auto tray

switching.

Summary of Contents for Color PageWorks Pro L































































































































































































































Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands

Minolta Color PageWorks Pro L, User Manual

Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands