Minolta Color PageWorks Pro L User Manual Download Page 112

Page: 112 / 222

Driver Settings: Windows NT 4.0

3-41

Device Option

The auxiliary accessories that are available for installation are
managed from this tab.

To add an available option from the

Installable Options

list to the

Installed Options

list, select the option and click the

Add

button.

The

Installed Options

list catalogs the optional accessories that have

been added to your printer.

To remove an option from the

Installed Options

list, select the option

and click the

Remove

button.

Removed options can be reinstalled using the previous procedure.

Summary of Contents for Color PageWorks Pro L































































































































































































































Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands

Minolta Color PageWorks Pro L, User Manual

Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands