Minolta Color PageWorks Pro L User Manual Download Page 178

Page: 178 / 222

Problems During Data Transmission and the Print Cycle

5-15

When the Error LED is on (4/9)

LED Display

Description

Response Required

Need Oiling Roller

The oiling roller or
fusing unit is not
installed.

Load the oiling
roller.

p. 4-11

Load the fusing unit.

p. 4-23

Replace Waste Bottle/
Put Waste Bottle

The waste bottle is
full.

The drum cartridge,
waste bottle and oil-
ing roller are on the
same replacement
cycle. Replace all
three units together.

p. 4-11

The waste bottle has
not been installed.

Install the waste bot-
tle.

p. 4-11

Replace Drum Cartridge/
Put Drum Cartridge

The drum cartridge
requires replace-
ment.

The drum cartridge,
waste bottle and oil-
ing roller are on the
same replacement
cycle. Replace all
three units together.

p. 4-11

The drum cartridge
has not been
installed.

Load the drum car-
tridge

p. 4-11

Summary of Contents for Color PageWorks Pro L































































































































































































































Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands

Minolta Color PageWorks Pro L, User Manual

Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands