Minolta Color PageWorks Pro L User Manual Download Page 65

Page: 65 / 222

Loading Paper: Loading Special Paper

2-40

Tray 1 (multipurpose tray)

Swing open

Tray 1

(multipurpose tray).

Adjust the

paper guides

to fit

the size of the paper.

To load a stack of long paper,
open the

paper support

Load the paper stack on the
tray, print side facing up.

When printing envelopes, fold
their flaps securely and load
them on the tray with their
flap side down.

When printing letterhead, load
it on the tray with the header
at the take-up end.

Note

• Generally, envelopes take to printing well but some types may wrinkle.

We strongly recommend testing any type of envelope with the printer
before buying it in large quantities.

Face up

Paper support

Paper guides

Face up

To Be Continued

Summary of Contents for Color PageWorks Pro L































































































































































































































Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands

Minolta Color PageWorks Pro L, User Manual

Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands