Minolta Color PageWorks Pro L User Manual Download Page 61

Page: 61 / 222

Loading Paper: Loading Transparencies and Labels

2-36

Load the transparency stack
into the cassette, print side
down, under the

paper

separator

, and flush with the

front side of the cassette.

Note

• Load the recommended

transparencies (Minolta CF
200-(D), 3MCG3710,
Minolta CF-100 (D) or 3M
PP2500) into the cassette so
that their front sides are

facing up

• The transparencies should be

loaded no higher than the

maximum level indicator

• Do not load additional transparencies on top of those remaining in the tray.

• Loading the transparencies with force may cause a misfeed.

Paper
separator

Face down

Face-side up

The face of the
transparency should
be facing up

To Be Continued

Summary of Contents for Color PageWorks Pro L































































































































































































































Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands

Minolta Color PageWorks Pro L, User Manual

Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands