Minolta Color PageWorks Pro L User Manual Download Page 158

Page: 158 / 222

Cleaning the Printer

4-39

Cleaning the Printer

Dust, dirt, and paper debris on the outer surfaces and inside the printer
can interfere with printer performance. Clean the printer regularly.

Note

Cleaning the Outside

Using a soft cloth and a mild
dishwashing detergent, wipe
the outside of the printer.

• Before cleaning, be sure to turn OFF the power switch and unplug the

power cord from the outlet.

• Use a soft cloth for cleaning. Do not use abrasives or corrosive deter-

gents.

ATTENTION

The

fusing unit

inside the

rear cover

can become very hot during

operation. To avoid burning yourself, avoid touching the area or the

fusing unit

Summary of Contents for Color PageWorks Pro L































































































































































































































Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands

Minolta Color PageWorks Pro L, User Manual

Search results

Summary of Contents for Color PageWorks Pro L

Reviews:

Related manuals for Color PageWorks Pro L

Brands by name

Popular brands