Mini COUNTRYMAN 2018 Owner'S Handbook Manual Download Page 199

Page: 199 / 200

using maximum cooling or heating power if

necessary. The temperature is then main-

tained.

To adjust

Turn the wheel to select the

desired temperature.

Avoid switching between different tempera-

ture settings in rapid succession. The auto-

matic air conditioning may not have suffi-

cient time to establish the temperature

selected.

Cooling function

Principle

Interior air is cooled and dried, then rehea-

ted to suit the temperature setting.
The interior can only be cooled when the

engine is running.

Switching on/off

Press the button.
The LED is illuminated when the

cooling function is switched on.

Depending on weather conditions, the

windscreen may mist over for a short time

when the engine is started.
The cooling function is switched on auto-

matically in the AUTO program.
When the automatic air conditioning is in

operation, condensation, see page

223

, de-

velops which exits underneath the vehicle.

Maximum cooling effect

Principle

System is set to the lowest temperature,

maximum air flow and recirculated-air

mode.

General

The function is available with an outside

temperature above approximately 0 ℃/32 ℉

and with the engine running.
The air flows from the side nozzles for the

upper body area. Therefore open the side

nozzles.
The air flow can be adapted when the pro-

gramme is active.

Switching on/off

Press the button.
The LED is illuminated when the

system is switched on.

System is set to lowest temperature, opti-

mum air flow and recirculated-air mode.

AUTO program

Principle

The air flow, air distribution and tempera-

ture are automatically regulated.

Switching on/off

Press the button.
The LED is illuminated when the

AUTO program is switched on.

Depending on the selected temperature,

AUTO intensity and external influences, the

air is directed towards the windscreen, side

windows and upper body, and into the foot-

well.
The following are switched on automatically

in the AUTO programme:

Seite 199

Air conditioning

CONTROLS

199

Online Edition for Part no. 01402988211 - II/18

Draft

from

BA-76

Summary of Contents for COUNTRYMAN 2018









































































































































































































Search results

Summary of Contents for COUNTRYMAN 2018

Reviews:

Related manuals for COUNTRYMAN 2018

Brands by name

Popular brands

Mini COUNTRYMAN 2018, Owner'S Handbook Manual

Search results

Summary of Contents for COUNTRYMAN 2018

Reviews:

Related manuals for COUNTRYMAN 2018

Brands by name

Popular brands