Mini COUNTRYMAN 2018 Owner'S Handbook Manual Download Page 165

Page: 165 / 200

Safety notes

WARNING

The system does not relieve you of your

personal responsibility to assess the visi-

bility conditions and traffic situation cor-

rectly. There is a danger of accidents.

Adapt your driving style to the traffic con-

ditions. Observe the traffic situation and

intervene actively if the situation warrants

it.

WARNING

Displays and warnings do not relieve you

of personal responsibility. System limita-

tions can mean that warnings or system

responses are not issued or are issued too

late, incorrectly, or without justification.

There is a danger of accidents. Adapt your

driving style to the traffic conditions. Ob-

serve the traffic situation and intervene

actively if the situation warrants it.

WARNING

Due to system limitations, individual func-

tions may not work properly when tow

starting/towing with activated Intelligent

Safety Systems. There is a danger of acci-

dents. Switch off all Intelligent Safety Sys-

tems before tow-starting/towing.

Overview

Button in the vehicle

Intelligent Safety button

Camera

The camera is located on the front side of

the rearview mirror.
Keep the windscreen clean and clear in the

area in front of the rearview mirror.

Switching on/off

Switching on automatically

The system is automatically activated at the

start of each journey.

Switching on/off manually

Press the button briefly:

–

The menu for the Intelligent

Safety Systems is shown. The

systems are switched off indi-

Seite 165

Safety

CONTROLS

165

Online Edition for Part no. 01402988211 - II/18

Draft

from

BA-76

Summary of Contents for COUNTRYMAN 2018









































































































































































































Search results

Summary of Contents for COUNTRYMAN 2018

Reviews:

Related manuals for COUNTRYMAN 2018

Brands by name

Popular brands

Mini COUNTRYMAN 2018, Owner'S Handbook Manual

Search results

Summary of Contents for COUNTRYMAN 2018

Reviews:

Related manuals for COUNTRYMAN 2018

Brands by name

Popular brands