manualshive.com logo in svg

Mini COUNTRYMAN 2018, Owner'S Handbook Manual

The Mini COUNTRYMAN 2018 is a classic crossover that will thrill adventurous drivers. Discover everything you need to know about this versatile vehicle in the detailed Owner's Handbook Manual. Download your free manual now from manualshive.com and embark on exciting journeys with confidence and expertise.

Share
Download
background image

Dynamic Stability Control DSC

If the indicator lamp is flashing: DSC

is regulating the acceleration and

braking forces. The vehicle is being

stabilised. Decrease speed and adjust driv-

ing style to the road conditions.
If the indicator lamp is illuminated: DSC has

failed.
Have the system checked by a Service Part-

ner of the manufacturer or another qualified

Service Partner or a specialist workshop.
DSC, see page 

170

.

Dynamic Stability Control DSC

deactivated, or Dynamic Traction Control

DTC activated

DSC is deactivated or DTC is activa-

ted.
DSC, see page 

170

, and DTC, see

page 

171

.

Runflat indicator RPA

The runflat indicator reports a loss of

tyre inflation pressure in a tyre.
Reduce your speed and carefully

stop the vehicle. Avoid violent or sudden

braking and steering manoeuvres.
Runflat indicator, see page 

157

.

Tyre Pressure Monitor TPM

The indicator lamp illuminates: the

Tyre Pressure Monitor is reporting a

low tyre inflation pressure or a flat

tyre. Note the information in the Check Con-

trol message.
The indicator lamp flashes and then illumi-

nates continuously: no flat tyres or loss of

tyre inflation pressure can be detected.

–

Fault due to systems or devices with the

same radio frequency: the system is au-

tomatically reactivated upon leaving the

field of interference.

–

TPM could not complete the reset: per-

form a system reset again.

–

A wheel without TPM wheel electronics

is fitted: have it checked by a Service

Partner of the manufacturer or another

qualified Service Partner or a specialist

workshop if necessary.

–

Malfunction: have the system checked

by a Service Partner of the manufacturer

or another qualified Service Partner or a

specialist workshop.

Tyre Pressure Monitor, see page 

152

.

Steering system

Steering system faulty.
Have the system checked by a Serv-

ice Partner of the manufacturer or

another qualified Service Partner or a spe-

cialist workshop.

Emissions

Engine function malfunctioning.
Have the vehicle checked by a Serv-

ice Partner of the manufacturer or

another qualified Service Partner or a spe-

cialist workshop.

Socket for on-board diagnosis, see

page 

303

.

Rear fog lights

Rear fog lights are switched on.
Rear fog lights, see page 

145

.

Green lights

Seat belt reminder for rear seats

Green: seat belt fastened on the cor-

responding rear seat.

Seite 127

Displays

CONTROLS

127

Online Edition for Part no. 01402988211 - II/18

Draft 

from 

BA-76

Summary of Contents for COUNTRYMAN 2018









































































































































































































Reviews:

No comments

Related manuals for COUNTRYMAN 2018

Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
Bestop 54822 Installation Instructions Manual preview
54822
Brand: Bestop Pages: 11
Whispbar K455W Fitting Instructions Manual preview
K455W
Brand: Whispbar Pages: 14
Vauxhall 2014 Insignia VXR SuperSport Specifications preview
2014 Insignia VXR SuperSport
Brand: Vauxhall Pages: 56
Hummer 2006 H2 Owner'S Manual preview
2006 H2
Brand: Hummer Pages: 502
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
Flash Cover MN019 Instructions preview
MN019
Brand: Flash Cover Pages: 2
Porsche WTY 2010 Warranty & Maintenance Manual preview
WTY 2010
Brand: Porsche Pages: 98
Caltrend LY115 Installation Instructions preview
LY115
Brand: Caltrend Pages: 3
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
Brainz 38508 Instruction Manual preview
38508
Brand: Brainz Pages: 2
Reese 50085 Installation Instructions Manual preview
50085
Brand: Reese Pages: 21
Mid America Motorworks 602-781 Instruction Sheet preview
602-781
Brand: Mid America Motorworks Pages: 2

Brands by name

Popular brands

Load more brands