manualshive.com logo in svg

Mini COUNTRYMAN 2018, Owner'S Handbook Manual

The Mini COUNTRYMAN 2018 is a classic crossover that will thrill adventurous drivers. Discover everything you need to know about this versatile vehicle in the detailed Owner's Handbook Manual. Download your free manual now from manualshive.com and embark on exciting journeys with confidence and expertise.

Share
Download
background image

tions. There is a danger of accidents or

damage to property. Do not deactivate Dy-

namic Stability Control DSC when driving

with a roof load.

Indicator and warning lamps

If the indicator lamp is flashing: DSC

is regulating the acceleration and

braking forces.

If the indicator lamp is illuminated: DSC has

failed.

Deactivating DSC: DSC OFF

General

Driving stability during acceleration and

cornering is restricted if DSC is deactivated.
To assist driving stability, re-activate DSC

as soon as possible.

Deactivating DSC

Press and hold the button – but for

no longer than approximately

10 seconds – until the DSC OFF in-

dicator lamp in the instrument cluster is il-

luminated and DSC OFF is displayed.
DSC is switched off.

Activating DSC

Press the button.
DSC OFF and the DSC OFF indicator

lamps are extinguished.

Indicator and warning lamps

DSC OFF is displayed in the instrument

cluster when DSC is deactivated.

If the indicator lamp is illuminated:

DSC is deactivated.

Automatic activation

If DSC is deactivated, it is automatically ac-

tivated in the following situations:

–

In the event of a flat tyre.

–

If Cruise Control is activated in TRAC-

TION mode or with DSC OFF.

Dynamic Traction Control

DTC

Principle

DTC is a variant of Dynamic Stability Con-

trol DSC and is optimised for forward mo-

mentum.
In particular road conditions, for example

roads on which snow has not been cleared

or unconsolidated ground, the system en-

sures maximum forward momentum but

with somewhat limited driving stability.
Activating DTC provides maximum traction.

Driving stability during acceleration and

cornering is limited.
Drive carefully.
It may be useful to activate DTC briefly in

the following exceptional situations:

–

When driving in slush or on uncleared,

snow-covered roads.

–

Starting in deep snow or on a loose sur-

face.

–

Driving with snow chains.

Deactivating/activating Dynamic

Traction Control DTC

Activating DTC

Press the button.
TRACTION is displayed in the in-

strument cluster and the DSC OFF indicator

lamp is illuminated.

Seite 171

Driving Stability Control Systems

CONTROLS

171

Online Edition for Part no. 01402988211 - II/18

Draft 

from 

BA-76

Summary of Contents for COUNTRYMAN 2018









































































































































































































Reviews:

No comments

Related manuals for COUNTRYMAN 2018

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Jeep Compass Owner'S Handbook Manual preview
Compass
Brand: Jeep Pages: 322
Jeep Compass Repair Manual preview
Compass
Brand: Jeep Pages: 341
Jeep Compass Operating Information Manual preview
Compass
Brand: Jeep Pages: 310
Jeep Compass Information Manual preview
Compass
Brand: Jeep Pages: 189
Jeep Compass Review preview
Compass
Brand: Jeep Pages: 26
Jeep Compass Overview preview
Compass
Brand: Jeep Pages: 21
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Chevrolet Malibu 2014 Owner'S Manual preview
Malibu 2014
Brand: Chevrolet Pages: 428
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Air Lift 88365 Installation Manual preview
88365
Brand: Air Lift Pages: 28
Dolphin DAS400 Owner'S Manual preview
DAS400
Brand: Dolphin Pages: 16
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12

Brands by name

Popular brands

Load more brands