manualshive.com logo in svg

Mini COUNTRYMAN 2018, Owner'S Handbook Manual

The Mini COUNTRYMAN 2018 is a classic crossover that will thrill adventurous drivers. Discover everything you need to know about this versatile vehicle in the detailed Owner's Handbook Manual. Download your free manual now from manualshive.com and embark on exciting journeys with confidence and expertise.

Share
Download
background image

If the system is active, the displayed speed

is stored and the vehicle reaches the stored

speed when the road is clear.

–

  or     button: every time it is

pressed to the resistance point, the de-

sired speed is increased or decreased by

approximately 1 km/h, approximately

1 mph.

–

  or     button: each time the button is

pressed beyond the resistance point, the

desired speed changes to the next multi-

ple of 10 km/h on the speedometer dis-

play.

  or     button: keep pressed to repeat the

action.

Adjusting the distance

Safety note

WARNING

The system does not relieve you of your

personal responsibility. Braking may be

performed too late because of system limi-

tations. There is a danger of accidents or

damage to property. Observe the traffic

conditions attentively at all times. Adapt

the distance to traffic and weather condi-

tions, also comply with the prescribed safe

distance by braking if necessary.

Reducing the distance

Press the button repeatedly until

the desired distance is set.

The set distance is briefly shown in

the left part of the instrument clus-

ter.

Increase the distance

Press the button repeatedly until

the desired distance is set.

The set distance is briefly shown in

the left part of the instrument clus-

ter.

Resuming Cruise Control

General

If Cruise Control is interrupted, it can be re-

sumed by calling up the saved speed.
Before calling up the saved speed, make

sure that the difference between the cur-

rent speed and the saved speed is not exces-

sively large. Otherwise, there may be inad-

vertent braking or acceleration.
The saved speed value is deleted and can no

longer be called up in the following instan-

ces:

–

When the system is switched off.

–

When the ignition is switched off.

Resuming the saved speed and

distance

While the system is interrupted,

press the button. Cruise Control is

resumed with the saved values. The

selected distance is briefly displayed on the

Info Display.

Switching distance control off/on

Safety note

WARNING

The system does not react to traffic travel-

ling in front of you, but maintains the

saved speed. There is a danger of acci-

dents or damage to property. Adjust the

desired speed to the traffic conditions and

brake if necessary.

Seite 178

CONTROLS

Driving comfort

178

Online Edition for Part no. 01402988211 - II/18

Draft 

from 

BA-76

Summary of Contents for COUNTRYMAN 2018









































































































































































































Reviews:

No comments

Related manuals for COUNTRYMAN 2018

UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
Hyundai Santa Fe 2019 Getting Started Manual preview
Santa Fe 2019
Brand: Hyundai Pages: 18
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Jeep Grand Cherokee SRT 2019 Owner'S Manual preview
Grand Cherokee SRT 2019
Brand: Jeep Pages: 656
Kuda-Phonebase 284380 Installation Instruction preview
284380
Brand: Kuda-Phonebase Pages: 3

Brands by name

Popular brands

Load more brands