Mini COUNTRYMAN 2018, Owner'S Handbook Manual

Page: 105 / 200

Steptronic transmission
Stopping the engine
1. Apply the parking brake when the vehi-
cle is stationary.
2. Engaging the selector lever in posi-
tion P.
3. Press the start/stop button.
The engine is switched off.
The radio ready state is switched on.
Manual gearbox
Stopping the engine
1. Press the Start/Stop button when the
vehicle is at standstill.
The engine is switched off.
The radio ready state is switched on.
2. Engage first gear or reverse.
3. Apply the parking brake.
Auto Start Stop function
Principle
The Auto Start Stop function helps you to
save fuel. The system stops the engine
when stationary, for example in a traffic jam
or at traffic lights. The ignition remains
switched on. For driving off, the engine
starts automatically.
Each time the engine is started via the
start/stop button, the Auto Start/Stop func-
tion is switched to standby and is activated
from approximately 5 km/h, approximately
3 mph.
Depending on selected drive mode, see
page 172 , the system is activated or deacti-
vated automatically.
Stopping the engine
Operating requirements
The engine is automatically shut down
when stationary under the following condi-
tions:
Manual gearbox:
– Gearbox in neutral and clutch pedal not
pressed.
– Driver's seat belt buckled or driver's
door closed.
Steptronic transmission:
– Selector lever in selector lever position
D.
– Brake pedal remains pressed while the
vehicle is at a standstill.
– Driver's seat belt buckled or driver's
door closed.
To be able to release the brake pedal when
the vehicle is stationary, engage the selec-
tor lever in the P position. The engine re-
mains switched off.
Press the brake pedal to continue driving.
The engine starts automatically when a gear
is engaged.
The air flow rate of the air conditioning sys-
tem is reduced when the engine is not run-
ning.
Steptronic transmission: manual
engine stop
Depending on the equipment and country
version, the engine can be switched off
manually, if the engine was not switched off
automatically when the vehicle came to a
stop:
– Rapidly press the brake pedal from the
current position.
– Engaging the selector lever in posi-
tion P.
If all the operating requirements have been
met, the engine is shut down.
Seite 105
Driving CONTROLS
105
Online Edition for Part no. 01402988211 - II/18
Draft
from
BA-76