Mini COUNTRYMAN 2018, Owner'S Handbook Manual

Page: 179 / 200

Switching distance control off
Distance control can be switched off and on
when driving with Cruise Control activated.
Press and hold the button.
Or:
Press and hold the button.
The indicator lamp in the instrument
cluster is illuminated.
Press one of the two buttons briefly to
switch the distance control back on.
A Check Control message is displayed after
changing over the distance control.
Displays in the instrument cluster
Desired speed and saved speed
In addition to the indicator lamp, the
desired speed is shown in the infor-
mation display.
– Display illuminates green: system is ac-
tive, the display shows the desired
speed.
– Display illuminates orange: system is in-
terrupted, the display shows the saved
speed.
– No display: system is switched off.
If no speed is displayed, the conditions re-
quired for operation may not be fulfilled at
the present time.
Vehicle distance
The selected distance from the vehicle in
front is briefly shown in the left part of the
information display.
Distance indicator
Distance 1
Distance 2
Distance 3
Automatically set after switching
on the system. Corresponds to ap-
proximately half of the value of
the speedometer reading, ex-
pressed in metres.
Distance 4
Detected vehicle
Symbol illuminates orange:
Preceding vehicle detected.
With the Stop&Go function and Step-
tronic transmission:
Rolling bars: the detected vehicle
has driven off.
ACC does not accelerate. To accelerate, acti-
vate ACC as follows:
– By briefly pressing the accelerator
pedal.
– By pressing the RES CNCL button.
– By pressing the or button.
Indicator and warning lamps
Symbol flashes orange:
The requirements for operation of
the system are no longer being met.
The system has been deactivated but will
continue to brake until you actively take
over by depressing the brake or the acceler-
ator pedal.
Seite 179
Driving comfort CONTROLS
179
Online Edition for Part no. 01402988211 - II/18
Draft
from
BA-76