Mini COUNTRYMAN 2018 Owner'S Handbook Manual Download Page 78

Page: 78 / 200

Manually adjustable seats

Overview

1 Forward/back
2 Thigh support
3 Height
4 Backrest angle

Forward/back

Pull the lever and slide the seat in the de-

sired direction.
After releasing the lever, move the seat gen-

tly forward or back to make sure it engages

properly.

Height

Pull the lever up or press the lever down un-

til the desired height is reached.

Backrest angle

Pull the lever and add or remove pressure

on the backrest as required.

Lumbar support

The curvature of the backrest can be

changed in such a way that the lumbar re-

gion, the lordosis, is supported. The upper

edge of the pelvis and the spinal column are

supported to encourage an upright posture.

Seite 78

CONTROLS

Seats, mirrors and steering wheel

Online Edition for Part no. 01402988211 - II/18

Draft

from

BA-76

Summary of Contents for COUNTRYMAN 2018









































































































































































































Search results

Summary of Contents for COUNTRYMAN 2018

Reviews:

Related manuals for COUNTRYMAN 2018

Brands by name

Popular brands

Mini COUNTRYMAN 2018, Owner'S Handbook Manual

Search results

Summary of Contents for COUNTRYMAN 2018

Reviews:

Related manuals for COUNTRYMAN 2018

Brands by name

Popular brands