Mini COUNTRYMAN 2018, Owner'S Handbook Manual

Page: 154 / 200

If a tyre inflation pressure test is
required
Message
A symbol with a Check Control message is
shown on the Control Display.
Symbol Possible cause
The system has detected a
wheel change, but no reset has
been run.
No reset has been performed on
the system. The system uses the
tyre inflation pressures saved
during the last reset for the
warning.
The tyre was not inflated prop-
erly.
The tyre inflation pressure has
dropped compared to the last re-
set.
Measure
1. Check the tyre inflation pressure and ad-
just as necessary.
2. Perform a reset of the system.
If the tyre inflation pressure is
insufficient
Message
A yellow warning lamp is illuminated
in the instrument cluster.
In addition, a symbol with a Check Control
message is shown on the Control Display.
Symbol Possible cause
There has been a loss of tyre in-
flation pressure.
No reset has been performed on
the system. The system uses the
tyre inflation pressures saved
during the last reset for the
warning.
Measure
1. Reduce speed and continue driving at
moderate speed. Do not exceed a speed
of 130 km/h, 80 mph.
2. At the next opportunity, for example fill-
ing station, check the tyre inflation
pressure in all four tyres and correct if
necessary.
3. Perform a reset of the system.
If there is a significant loss of tyre
inflation pressure
Message
A yellow warning lamp is illuminated
in the instrument cluster.
In addition, a symbol with the affected tyre
is shown in a Check Control message on the
Control Display.
Symbol Possible cause
There is a flat tyre or substantial
loss of tyre inflation pressure.
No reset has been performed on
the system. The system uses the
tyre inflation pressures saved
during the last reset for the
warning.
Seite 154
CONTROLS Safety
154
Online Edition for Part no. 01402988211 - II/18
Draft
from
BA-76