Changing the ECG Settings
Monitoring ECG
7 - 14
TM80/TM70 Telemetry Monitor Operator’s Manual
7.4.2
ECG Leadwire Types
ECG leadwire type has three options as follows:
■
[
Auto
]: the device automatically sets the leadwire type according to the leads
connected.
■
[
3 Lead
]: the leadwire type is set to 3-lead.
If the leadwire type is set to 3-lead, the [
Smart Lead
] option becomes [
Monitored
Lead
]. You can select the desired lead from the [
Monitored Lead
] option to set
the first ECG waveform displayed on the main screen.
■
[
5 Lead
]: the leadwire types is set to 5-lead.
All waveform leads display on the main screen.
■
[6 Lead
]: the leadwire types is set to 6 lead.
If the leadwire type is set to 6 lead, there will be two options [
Va
] and [
Vb
]
displayed under [
Cable Type
].
◆
[
Va
] options: Va, V1, V2, V3, V4, V5, V6. Va is the default.
◆
[
Vb
] options: Vb, V1, V2, V3, V4, V5, V6. Vb is the default.
7.4.3
Configuring the ECG Waveforms
1.
In the [
Waveform
] section of the [
ECG
] menu, select the options described in the
following table.
2.
Tap
to exit the [
ECG
] menu.
Options
Description
Settings*
All Lead Size
Selects the waveform size for all the leads.
To set the waveform size for a specific
lead, select that lead from the [
Waveform
Size
] field.
1.25 mm/mV, 2.5 mm/mV, 5 mm/
mV,
10 mm/mV
, 20 mm/mV, 40
mm/mV, Auto
This configuration will be applied for all ECG waveform size.
Speed
Selects the waveform sweep speed.
6.25 mm/s,
12.5 mm/s
, 25 mm/s
*
The factory default settings are in bold.
Summary of Contents for BeneVision TM80
Page 2: ......
