Exiting the Standby Mode
Patient Management
5 - 4
TM80/TM70 Telemetry Monitor Operator’s Manual
5.5
Exiting the Standby Mode
Press the
key to exit Standby mode.
After you exit the Standby mode, the system responds as follows:
■
Restores parameter measurement as previously configured.
■
Alarm system is activated.
■
The TM80/TM70 notifies the CMS of returning to the Monitoring mode.
5.6
Discharging the Patient
When the TM80/TM70 is connected to the CMS, discharging the patient will stop moni-
toring at the TM80/TM70 and CMS.
After discharging the patient, the patient’s configuration is cleared at the TM80/TM70.
The TM80/TM70 can admit next new patient by applying the user configuration. If the
TM80/TM70 does not save the user configuration, it will load the departmental settings
sent by the CMS for the new patient.
You can discharge the patient by selecting the [
Discharge Patient
] menu or restarting
the TM80/TM70.
5.6.1
Selecting the [Discharge Patient] menu
1.
In the main menu, tap [
Discharge Patient
].
2.
In the [
Discharge Patient
] confirmation menu, select [
Yes
].
◆
The patient is discharged from both the TM80/TM70 and the CMS.
◆
The patient’s configuration is cleared and the default departmental settings
are restored.
◆
The [
Discharged Pat.
] window of the CMS adds a record of the patient’s his-
tory data.
3.
Press the
key to start monitoring by applying the default departmental set-
tings.
NOTE
•
When the TM80/TM70 is connected to a CMS, the patient being dis-
charged from the TM80/TM70 is also discharged from the CMS. Refer to
the
BeneVision Central Monitoring System Operator’s Manual (P/N 046-
007960-00)
for details.
Summary of Contents for BeneVision TM80
Page 2: ......
