MIMAKI tx300p, Operation Manual, Page: 60 / 130

Chapter 3 Setup
3-2
About SETUP MENU
On SETUP MENU, you can set the print conditions to match the media you usually use.
SETUP
●
SETUP 1 >
>
○
SETUP 2
> ○ SETUP 3
> ○ SETUP 4
> ○ Temporary
>> <<
Select “SETUP 1 to 4” or “Temporary”,
and then press the key.
MENU
SETUP >
>
MAINTENANCE
> MACHINE SETUP
> NOZZLE CHECK
> INFORMATION
SETUP 1 1/3
FEED COMP. >
>
DROP.POScorrect
HOST
>
LOGICAL SEEK
DRYING TIME
HOST Overprint
>> <<
>
> INTERVAL WIPING
RESET SETTING
>> <<
SETUP 1 3/3
>
> INTERVAL WIPING
RESET SETTING
>> <<
SETUP 1 3/3
MARGIN/LEFT HOST
HOST
MARGIN/RIGHT
100 ％ AUTO CLEANING
100 ％ MAPS4
100 ％ FEED SPEED
>> <<
SETUP 1 2/3
MARGIN/LEFT HOST
HOST
MARGIN/RIGHT
100 ％ AUTO CLEANING
100 ％ MAPS4
100 ％ FEED SPEED
>> <<
SETUP 1 2/3
MARGIN/LEFT HOST
HOST
MARGIN/RIGHT
100 ％ AUTO CLEANING
100 ％ MAPS4
100 ％ FEED SPEED
>> <<
SETUP 1 2/3
MARGIN/LEFT HOST
HOST
MARGIN/RIGHT
100 ％ AUTO CLEANING
100 ％ MAPS4
100 ％ FEED SPEED
>> <<
SETUP 1 2/3
MARGIN/LEFT HOST
HOST
MARGIN/RIGHT
100 ％ AUTO CLEANING
100 ％ MAPS4
100 ％ FEED SPEED
>> <<
SETUP 1 2/3
SETUP 1 1/3
FEED COMP. >
>
DROP.POScorrect
HOST
>
LOGICAL SEEK
DRYING TIME
HOST Overprint
>> <<
SETUP 1 1/3
FEED COMP. >
>
DROP.POScorrect
HOST
>
LOGICAL SEEK
DRYING TIME
HOST Overprint
>> <<
SETUP 1 1/3
FEED COMP. >
>
DROP.POScorrect
HOST
>
LOGICAL SEEK
DRYING TIME
HOST Overprint
>> <<
SETUP 1 1/3
FEED COMP. >
>
DROP.POScorrect
HOST
>
LOGICAL SEEK
DRYING TIME
HOST Overprint
>> <<
SETUP 1 1/3
FEED COMP. >
>
DROP.POScorrect
HOST
>
LOGICAL SEEK
DRYING TIME
HOST Overprint
>> <<
REMOTE MENU
TEST PRINT
CLEANING
Local <Setup 1> 12:00
REMOTE MENU
TEST PRINT
CLEANING
Local <Setup 1>
12:00
width:1340mm
heigth: 4.0mm
width:1340mm
heigth: 4.0mm
: Press this to select SETUP MENU, or to switch to the
previous screen.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..

SETUP MENUs at-a-glance