MIMAKI JV33-260BS Operation Manual Download Page 182

Page: 182 / 232

5-44

Replacing the cutter blade

The cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).

Press the

key then press the

key.

• The carriage moves onto the platen.

Open the front cover.

Replace the cutter unit by the carriage.

(1)

Loosen a screw of the cutter unit.

(2)

Remove the cutter unit.

(3)

Mount a new cutter unit.

(4)

Fasten the screw of the cutter unit to secure the cutter unit.

• The blade is sharp. Be careful not to hurt yourself or anyone else.
• Keep the cutter blades away from the reach of children. Be sure to dispose of the worn-out cutter blades

according to the applicable national and local laws and regulations.

• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade.

This will help pick up the cutter blade if it drops.

Front cover

Screw

Cutter
unit

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Related manuals for JV33-260BS

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Related manuals for JV33-260BS

Brands by name

Popular brands