MIMAKI JV33-260BS Operation Manual Download Page 202

Page: 202 / 232

7-4

Ink specifications

Item

When solvent ink is used

Supply

Dedicated solvent ink cartridges

Color

Black ink cartridge
Cyan ink cartridge
Magenta ink cartridge
Yellow ink cartridge

Ink capacity

600cc per pack

Shelf life

• BS

Ink

1 year from the date of manufacture (at room temperature)

Within three months after opening the package

Storage
temperature

Storage

0 to 25°C (Average daily temperature)
• Be sure to keep a vessel in the airtight condition.

Transportat
ion

-20 to 60°C
• Avoid the condition lower than -20

°C and higher than 60 °C.

Do not disassemble ink packs and do not refill them with ink.

Ink could freeze if kept in a cold place for an extended period.

• When solvent ink is used, if the ink freezes, thaw it at room temperature (25

°C

) spending

more than three hours before use.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands