manualshive.com logo in svg

MIMAKI JV33-260BS, Operation Manual

Share
Download
MIMAKI JV33-260BS Operation Manual Download Page 43

2-13

Setting medias

1

2

Basic Operations

5

6

6

Open the front cover and raise the clamp lever at the 
front of this machine.

7

Slide the media from the back to the front.

• Insert the roll media between the platen and the pinch roller,

and slide it to the front.

• Pull the media out to the front of this machine with enough

length.

8

Push the clamp lever down at the back of this 
machine.

• Lock the media temporarily.

9

Raise the clamp lever at the front of this machine.

• Temporary lock of the media is released.

10

Pull out the media.

• Holding both ends of the media by two people, pull out the media end about 50cm longer than the floor.
• To set the media straight, pull out the media long.

Clamp 
lever

Clamp 
lever

Clamp 
lever

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands