MIMAKI JV33-260BS Operation Manual Download Page 129

Page: 129 / 232

4-5

Printing on Double Side

Double Sid

ed Printing

Printing on Front Side

For operations and settings before printing, see P.2-6 ”Setting medias” to P.2-33 ”Head cleaning”.

Set media. (

P.2-6)

Check the heater temperature.

• Check CONSTANT lamp on the heater panel is lighting in green.

Press

key.

• Printes switches to REMOTE mode.
• You can check the selected type (print condition).

Start Raster Link Pro4, and select data to print

• for details about image selection, see Reference Guide (Common features for every printer) of Raster Link

Pro4.

Set the print condition on Raster Link Pro4.

(1)

Select [Front side] in Double sided printing.

(2)

Click [OK].

Start printing on Raster Link Pro4.

• Right-click the image to print, select [RIP and Print] or others, and start printing.
• When printing on the front side, the following settings are fixed.

• Before printing on roll media, check the media is not slack on the back of the printer.

If bowed, rewind the roll media manually to take up the slack. With a slack, it may cause defective
printing.

• When using RIP software made by another company, refer to the operation manual of the software

used.

Setting

Fixed value

Right and left margin (in the effective print area)

0mm

Color pattern

OFF

Setting of crosswise origin by jog key

invalid

Stamp

OFF

* REMOT E . 1 *

[ # 0 1 ]

0 . 0 0m

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Related manuals for JV33-260BS

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Related manuals for JV33-260BS

Brands by name

Popular brands