MIMAKI JV33-260BS Operation Manual Download Page 19

Page: 19 / 232

1-5

Names of Parts and Functions

Before Use

Rear / Sides

Pre-heater

Preheats the media before printing.
(Located inside the platen)

Heavy-duty feeding device

Set a heavy roll medium when drawing with a heavy
roll medium (the medium width is 1.6m or more).

AC inlet

Connect the power cable to the AC inlet.

Clamp lever (rear)

Interlocks with the clamp lever in the font
of this machine.

USB 2.0 connector

This is USB2.0 interface connector.

Main power switch

Turns on/off the main power for this machine. Leave
the main power turned on to prevent ink clogging.

Cleaning solution
cartridge

Set a dedicated Washings
cartridge (optional).

Roll holders

Putting this into the paper core (right
and left) of a narrow roll medium
(less than 1.6m), hold the medium.
It supports the paper core of 2 inch
and 3 inch.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands