manualshive.com logo in svg

MIMAKI JV33-260BS, Operation Manual

Share
Download
MIMAKI JV33-260BS Operation Manual Download Page 157

5-19

1

2

3

4

5

Rou

tine Maintenan

ce

Cleaning heads and surroundings parts

Take great care, especially during cleaning, not to damage the heads, which employ very precise mechanisms.
Using a clean stick, rub off the gelatinous ink that may be adhering to the lower part of the slider and surrounding
parts of the heads. In doing so, never rub the nozzle part of the heads.

1

Select [CR.MAINTENANCE] of the maintenance menu.

(1)

Press the 

 key in the local mode.

(2)

Select [MAINTENANCE] by pressing the 

 keys then press the 

 key.

(3)

Select [CR.MAINTENANCE] by pressing the 

 keys then press the 

 key.

(4)

Press the 

 key.

• The carriage moves to the left end of the machine body.

2

Open the maintenance cover.

(1)

Turn four screws that fix the maintenance cover to

the left, and remove them.

(2)

Remove the maintenance cover.

• If the maintenance cover is hard to remove, use the

supplied screwdriver.

3

Wipe ink sticking to the side of the head off with a clean stick.

4

Press the 

 key after the cleaning.

Tools required for cleaning

• Clean stick (SPC-0527) • Gloves

• Goggles

• Be sure to wear the attached goggles and gloves for works when cleaning is performed. If not, ink may 

be caught in your eyes during the works.

• An organic solvent is used in ink. Wash your eyes and skins with plenty water immediately when you get 

ink on skins or in eyes.

Screw

Screw

Maintenance 
cover

Rotate it

left.

Clean the side surface of the head (shown in deep gray) with a clean stick.

The nozzle part (Never touch it.)

C l o s e a c o v e r

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands