MIMAKI JV33-260BS Operation Manual Download Page 135

Page: 135 / 232

4-11

Printing on Double Side

Double Sid

ed Printing

Set the media so that the cuts on the cutting line become parallel to the line of the
platen.

• Set on the platen line, whichever is easier to check.

Push down the clamp lever

• Media detection starts.
• When media detection is completed, media type selection screen appears.

Select the media type (translucent or opaque media).

• After selecting media type, set position check line is automatically

printed, and the lines are fed up to the LED light unit (option).

Check the media is set parallel.

• Check the media is set parallel with the print on the

front side.

If the media is set parallel, press the

key.

• If the media is not set parallel, raise the clamp lever and follow from the Step 3 again.
• The set position check line can be printed up to six times. When setting the media again, check the newly

printed lines are parallel to the front side.

• When using the take-up device, check the lines are parallel, and set the media on the take-up device.

Start Raster Link Pro4, and select an image to print.

• For details about image selection, see Reference Guide (Common features for every printer) of Raster

Link Pro4.

Cut

Media

B a c k S i d e PRT . PREPER .

Me d i a

: T r a n s l u c e n t

Good: parallel

Front

Not good: not parallel

Set position check line

Back

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Related manuals for JV33-260BS

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Related manuals for JV33-260BS

Brands by name

Popular brands