MIMAKI JV33-260BS Operation Manual Download Page 51

Page: 51 / 232

2-21

Setting medias

Basic Operations

Insert the roll media in this machine.

• The roll media can be smoothly inserted by slanting the media.

(1)

Pull the media out of the roll to the head of the platen.

(2)

Insert the media between the platen and the pinch roller.

• Pull the media out of the roll so that the media can be grasped from the front of the machine.

(3)

Push down the clamp lever from the back of this machine.

• The media is held.

Lock the roll stopper.

(1)

Turn the roll stopper to the arrow direction shown on the
right.

(2)

Push the lock pin and fix it.

Pull out the roll media out.

(1)

Open the front cover.

(2)

Raise the clamp lever from the back of this machine.

(3)

Pull out the roll media gently and then stop pulling when
locked lightly.

Pinch roller

Lock pin

Roll stopper

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands