MIMAKI JV33-260BS Operation Manual Download Page 49

Page: 49 / 232

2-19

Setting medias

Basic Operations

●

Installing the counter weight for adjusting the take-up/ feeding tension-bar weight

Install the proper number of the counter weight depending on the media type.
The counter weight can be installed up to 14 pieces.

Media condition

Solution

For the strong tension to the media, the media
wrinkles to the feeding direction of the media.

Increase the number of the counter weight to be installed,
depending on the media used.

For the weak tension to the media, the media loosens
and is not taken up finely.

Decrease the number of the counter weight to be installed,
depending on the media used.

• The counter weight is very heavy. Handle it with care.

If your finger or foot is stuck in the weight, you may be injured.

• If the tension-bar is highly lifted, the tension-bar becomes heavy.

(The actual weight of the tension bar is weighted.)

• Not to lose the unused counter weight, put it in the storage box.

To adjust the feeding tension-bar
weight, install the weight on the front of
this machine.

To adjust the take-up tension-bar
weight, install the weight on the
back of this machine.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands

MIMAKI JV33-260BS, Operation Manual

Search results

Summary of Contents for JV33-260BS

Reviews:

Brands by name

Popular brands