manualshive.com logo in svg

MIMAKI JV33-260BS, Operation Manual

Share
Download
MIMAKI JV33-260BS Operation Manual Download Page 92

3-26

Machine settings

It is each type of setting for using this machine more comfortably. [MACHINE SETUP] and [MACHINE SETUP2]
are available in this machine.
The following items are settable in MACHINE SETUP 1, 2.

Item

Set value 

*1

*1. The setting at the time of purchase is indicated with the underline.

Outline

Machine Setup

DEODORIZE 
FAN 

*2

*2. DEODORIZE FAN is optional.

STOP TIME

0 ~ 120 ~ 240min/
CONTINUE

Setting the time until the rotation of the exhaust fan is
interrupted after the completion of printing.

RENEW

ON / OFF

Switching the current operation of the exhaust fan.

Feeding/
Take UP

UNIT SELECT

FEEDING

：

ON / OFF

TAKE-UP

：

ON / OFF

When using a heavy roll medium (the width is 1.6m or
more), set “ON” to “FEEDING” and “TAKE-UP”.

Te n s i o n B a r -
POS.

LOW /  HIGH

Set the operating position of the tension bar for the heavy-
duty take-up device.

Double Side 
Mode

Print Of Back 
Side

ON / OFF

Perform setting related to double-faced printing. 
For details, refer to P.4-2.

INK LAYERS

1  ~  2  ~  9 

MEDIA 
DETECT

OFF/
10  ~  10000mm

DRYNESS FEED

ON / OFF

Setting whether feeding for drying a media is performed
after the completion of printing or not.

STAMP SETUP

ON / OFF

Setting to output the output date and drawing conditions
after the completion of printing.

Waste Ink Warning

ON / OFF

Setting whether a check message for the waste ink tank is
displayed or not.

600cc Cartridge 

*3

*3. It is not displayed when the 600cc cartridge is not set in the ink slot.

Setting the weight of an eco-case. ( 

P.3-38)

Test Draw Arrange

FEED DIR. / 
SCAN DIR.

Setting the deployment direction of the test pattern when
performing test printing repeatedly.

CART.PRIORITY 

*4

*4. This setting is only available for 4-color set.

INK LEVEL
EXP. DATE

Condition of the ink cartridge to be used first by the
double-cartridge automatic switching function can be
selected.

ENV. TEMP. 

*5

*5. This function is available for the firmware Ver.3.30 and later.

Not wait ARR.
Wait arrival

Sets the operation when an error indicating that the
ambient temperature is out of the usable temperature
range occurs. 
(

P.3-46)

Machine Setup 2

CONFIRM. FEED

ON / OFF

The feeding set for checking the result after test printing is
settable.
[BACK FEED] for returning a media to the original position
by pressing the 

 key is settable when set to

“ON”.

TIME SET

Setting the present date and time.

UNIT 
SETUP

TEMP.

°C (Centigrade)
/°F (Fahrenheit)

Setting a unit of temperature indications.

LENGTH

mm / inch

Setting a unit of length and area indications.

MACHINE NAME

01 ~ 99

Setting a machine name (machine No.) for recognizing
each machine when plural machines are connected
through USB2.0 interface.

KEY BUZZER

ON / OFF

Setting a buzzer sound of the time when a key is pressed.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands