manualshive.com logo in svg

MIMAKI JV33-260BS, Operation Manual

Share
Download
MIMAKI JV33-260BS Operation Manual Download Page 112

3-46

Change the operation condition of the ambient temperature

If you print in the status that the temperature of the place in which the machine has installed (ambient
temperature) is out of the usable temperature range, ink discharging defect or changing color may occur, and it
adversely affects the printing quality.
Here, select the operation if the ambient temperature is out of the usable temperature range when printing.

1

Press the 

 key in the local mode.

2

Select [MACHINE SETUP] by pressing the 

 keys.

3

Press the 

 key.

4

Select [ENV.TEMP.] by pressing the 

 keys.

5

Press the 

 key.

6

Press 

 to select a set value.

Not wait ARR.

: The error message is displayed for a moment, and printing starts.

Wait arrival

: After the error message is displayed, wait until the ambient temperature reaches the

proper value. Then, printing starts.

7

Press the 

 key.

8

Press the 

 key several times to end.

• For the details of the usable temperature range, refer to P.7-3 “Available temp.”.
• If the ambient temperature is out of the usable temperature range at the start of printing, the error 

message below is displayed to inform you of it.

* * * * ERROR 1 2 0 * * * *

ENV I RONMENT T EMP ( LO )

* * * * ERROR 1 2 1 * * * *

ENV I RONMENT T EMP ( H I )

FUNCT I ON
SE TUP

< ENT >

FUNCT I ON

MACH I NE SE TUP

< ENT >

MACH I NE SE TUP
DEODOR I Z E F AN

< e n t >

MACH I NE SE TUP

ENV . T EMP .

< e n t >

ENV . T EMP .
SE L

:

N

o t w a i t ARR .

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands