MIMAKI JV33-130BS Page 162 Operation Manual Download

Page: 162 / 206

4-44

Replacing the cutter blade

The cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).

Press the

key then press the

key.

• The carriage moves onto the platen.

Open the front cover.

Replace the cutter unit by the carriage.

(1)

Loosen a screw of the cutter unit.

(2)

Remove the cutter unit.

(3)

Mount a new cutter unit.

(4)

Fasten the screw of the cutter unit to secure the cutter unit.

• The blade is sharp. Be careful not to hurt yourself or anyone else.
• Keep the cutter blades away from the reach of children. Be sure to dispose of the worn-out

cutter blades according to the applicable national and local laws and regulations.

• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter

blade. This will help pick up the cutter blade if it drops.

Front cover

Screw

Cutter
unit

Summary of Contents for JV33-130BS















































































































































































































Search results

Summary of Contents for JV33-130BS

Reviews:

Related manuals for JV33-130BS

Brands by name

Popular brands

MIMAKI JV33-130BS, Operation Manual

Search results

Summary of Contents for JV33-130BS

Reviews:

Related manuals for JV33-130BS

Brands by name

Popular brands