MIMAKI JV33-130BS, Operation Manual

Page: 76 / 206

3-20
Setting Auto cleaning
The machine is settable so that the head cleaning is automatically carried out when printing is completed for
the set length.
At the completion of printing, the machine counts the length printed after the previous head cleaning and
performs the cleaning automatically if required.
Reliable output results are always ensured if the heads are always kept clean.
The first cleaning is performed immediately before the first printing after the machine is started. Then sub-
sequent cleaning is performed every printing on the specified length of media.
When operation interval is 1000 mm (example)
1
Press the key in the local
mode.
2
Press the key.
3
Select the type (1-4) by pressing the keys
then press the key.
4
Select [AUTO CLEANING] by pressing
the
keys.
5
Press the key.
Print length : 1.6 m Cleaning (3rd time)
Print length : 0.0 m Cleaning (1st time)
Print length : 0.8 m No cleaning
Print length : 1.6 m Cleaning (2nd time)
Print length : 0.8 m No cleaning
When five copies of an image 80 cm long are printed in
series, cleaning is repeated before printing each of the
1st, 3rd, and 5th copies.
F UNC T I ON
S E T UP
< EN T >
S E T UP
S E L EC T
: T Y P E . 1
[ 1 ]
AU TO CRE AN I NG < e n t >
[ 1 ] AU TO CRE AN I NG
S E T UP : O F F