MIMAKI JV33-130BS, Operation Manual

Page: 116 / 206

Switch Setting of Ink Supply Path
3-60
When both ink cartridge and MBIS are used
When both an ink cartridge and the optional bulk ink system (MBIS) are set in the supply paths of the same
color for 4-color ink set, you can select the ink to be used first.
1
Press the key in the LOCAL or
the REMOTE mode.
2
Press the key..
3
Press the key to set
the supply path and the ink to be used
first.
Select the supply path :Press the key.
Select the ink to be used first :Press the key.
4
Press the key.
• It enters in the LOCAL or the REMOTE mode.
• Usually, when both an ink cartridge and the bulk ink system (MBIS) are set in the supply path
of the same color, the ink in the bulk ink system (MBIS) is used first.
• This setting is only available for 4-color set.
• If supply path does not have both ink cartridge and the bulk ink system (MBIS), this function
cannot be set.
• Pull out the ink cartridge selected on this function or turn the power on again to disable the
setting.
E S 3 - I NK MMCCY Y K K
REMA I N 3 4 5 6 7 8 9 9
BU L K / CAR T S E L EC T
- B B B
Displays the currently supplying
ink.
B:Bulk ink system (MBIS)
C:Ink cartridge
BU L K / CAR T S E L EC T
- C B B