MIMAKI JV33-130BS Operation Manual Download Page 180

Page: 180 / 206

6-4

Ink specifications

Item

When solvent ink is used

Supply

Dedicated ink cartridges

Color

Black ink cartridge
Cyan ink cartridge
Magenta ink cartridge
Yellow ink cartridge

Ink capacity

600cc per cartridge

Shelf life

• BS

Ink

1 year from the date of manufacture
(at room temperature)

Within three months after opening the package

Storage tem-
perature

Storage

0 to 25°C (Average daily temperature)

• Be sure to keep a vessel in the airtight condition.

Transpor-
tation

-20 to 60°C

• Avoid the condition lower than -20

°C

and higher than 60

°C



Do not disassemble ink cartridges and do not refill them with ink.



Ink could freeze if kept in a cold place for an extended period.

• When solvent ink is used, if the ink freezes, thaw it at room temperature (25°C) spending

more than three hours before use.

Summary of Contents for JV33-130BS















































































































































































































Search results

Summary of Contents for JV33-130BS

Reviews:

MIMAKI JV33-130BS, Operation Manual, Page: 180 / 206

Search results

Summary of Contents for JV33-130BS

Reviews: