MIMAKI JV33-130BS, Operation Manual, Page: 129 / 206

4-11
Maintaining Capping station
4
Routine Maintenance
6
Press the key then fill the cap
with the cleaning solution.
• The cleaning solution is applied by drops when
the is pressed.
• When the is pressed again, drops stop.
• Repeat the drops several times to fill the cap with
the cleaning solution just before the solution over-
flows from the cap.
7
Close the front cover then press the
key.
8
Set the duration for leaving the clean-
ing solution by pressing the
keys.
• Set value : 1 to 99 minutes (Unit: minute)
9
Press the key.
• The cleaning solution filled in the cap is absorbed.
• The screen on the right is displayed only for the
duration set in the step 8.
• It returns to the local mode after the duration.
• When nozzle missing is not cleared even after this washing is carried out several times, exe-
cute "When Nozzle clogged after cleaning" ( P.4-21) and "DISCHARGE & WASH" ( P.4-
22) . Contact a distributor or our sales office (a service call) unless the missing is cleared even
after the above.
• Perform the followings unless the cleaning solution has been filled in the machine.
(1) Perform the operations up to the step 5.
(2) Fill the cap with the cleaning solution by using a syringe.
(3) Perform the operations from the step 7.
S T . MA I N T ENANCE
L E A V I NG T I ME : 1 m i n
S T . MA I N T ENANCE
L E A V I NG T I ME : 2 m i n
* B e i n g I n i t i a l i z e d *
P L E A S E WA I T
< L OCA L . 1 >