MIMAKI JV33-130BS, Operation Manual

Page: 78 / 206

3-22
Setting cleaning while printing
Set it whether the head cleaning is carried out automatically during printing or not.
Upon cleaning during printing, set the cleaning interval to the length printed.
The printing is interrupted each in the set length and the head cleaning is carried out automatically.
1
Press the key in the local
mode.
2
Press the key.
3
Select the type (1-4) by pressing the keys
then press the key.
4
Select [Print.CLEANING] by pressing
the
keys.
5
Press the key.
6
Select “ON” by pressing the
keys.
• Proceed to the step 9 when “OFF” is selected.
7
Press the key.
8
Set an interval of cleaning and cleaning
type by pressing the
keys.
Item selecting : by the keys
Interval and Type setting : by the keys
F UNC T I ON
S E T UP
< EN T >
S E T UP
S E L EC T
: T Y P E . 1
[ 1 ]
P r i n t . C L E AN I NG < e n t >
[ 1 ] P r i n t . C L E AN I N
S E T UP : O F F
[ 1 ] P r i n t . C L E AN I N
S E T UP : O N
I N T ERV A L : T Y P E
1 0 0 0mm : N ORMA L
I N T ERV A L : T Y P E
1 0 0 0mm : N ORMA L
Interval :
10 to 10000mm
Type : NORMAL
SOFT
HARD